| Technology advantages of Perfect binding machines from CAIBA |
| No |
function |
description |
| 1 |
Side glue technology |
Side glue is one of the most important binding quality standard. At current market, all the direct line binding machines use jagged side glue which formed by pressing the back glue to stick covers. This is not the real side glue. Moreover, the different side glue of every book may easily cause defectives . Although there is independent side glue in the traditional round binding machines, it needs to repeatedly adjusting when binding books with different thicknesses. But with our side glue technology, machines can automatically adjust to the books with different thickness, no need of any adjust or parameter reset. |
| 2 |
Height of clamp table adjustment |
Without this technology, when the thickness of covers are different, the back shape of the book will be too square or too round, and the problems are hard to resolve. With this technology, machines can can adapt to the book with different thickness, control the square and the round of the book back shape. |
| 3 |
Automatic head and rear of glue control |
Normal machines need to clear the glue which left on the table after binding each book. If you forget to do so, the left glue will destroy the next book binding. This technology automatically control the extra glue of books two ends, protect the table, also, it can meet the needs of special cut-free books. |
|
|
| 4 |
Three glue roller |
When the machine runs fast, only one glue roller is obviously not enough of gluing. It may cause lack of glue, cover shape failure, or other defectives. |
| 5 |
Book table |
Without this book table, you need a desk to put the book block, cover and books. It will occupy some place, and still less convenient than this book table. |
| 6 |
smoke evacuation and intelligent temperature control |
Because of the small and closed office, working environment is always with lots of smoke, harmful to the health. With this technology, the smoke can decreased more than 60%. |
|
| 7 |
Glue roller automatically start |
Automatically detect the glue melting, automatically start the roller rotation, it can avoid the damage of the electricity motor when starting the roller before glue melt, Prevent damaging to the machine because of false starting the glue roller when the glue does not melt or avoiding the ageing of the glue caused by forgetting to start the glue roller after turn on the machine. |
| 8 |
Glue automatic heat-preservation, automatic speed change |
It can automatically maintain the heat after stop working, automatically timing to stir, quickly change to the working condition. Save electricity, to prevent the glue from ageing and decrease the smoke |
| 9 |
Milling cutter automatically turn on/off |
If you forget to turn on the milling cutter, the back of the book block will get different quantity of glue, not binding firmly, cover will be too square, and so on. And because of the frequently turn on and turn off, it will cause noise and waste about 40% quantity of electricity |
| 10 |
automatically Clamp self check |
It can prevent the incomplete clamping, with which it can influence gluing and cover shaping, create production rejects |
| 11 |
Automatic detect the enter of book, automatic clamp |
When detect the enter of books, it can automatically clamp firmly, automatically take the next step. It can greatly increase the working efficiency. |
| 12 |
Automatically loosen the book,Detect the clearance of books,Clamp automatically replace |
when forget to pick the book out, there would be glue everywhere like clamp, table, brush, milling cutter, its hard to clear. Efficiency would be decreased. This machine can resolve the problem. |
| 13 |
Open type table,horizontally pick books |
Other machines cant horizontally pick books, so it must pick up the books after replace the clamp. Efficiency would be decreased. And there would be glue everywhere like clamp, table, brush, milling cutter, its hard to clear. And it will separate the new shaped cover from the spine. Open type table can be more convenient to pick the covers and books, resolve all the problems above and greatly increase the efficiency. |
|
|
| 14 |
anti-collision digital adjustment |
When the machine works for some time, the inertia of the run speed will be greater, book block and the cover would be malposition. It always need the technical person to adjust this twice. This technology using digital adjustment to adjust the place of the book block resolve the malposition problem. |
|
| 15 |
intelligent continuous working |
When detecting the enter of books, it can automatically clamping, working, turning on/off the milling cutter, intelligently decide to pick the book or not, returning without press any button. |
| 16 |
High power dedusting |
Ensure there are less Paper Scrap on the table or in the blue box, greatly improve the binding quality. |
| 17 |
Clamp constant pressure |
Because the voltages are always not the same in different cities, the given pressure will alter according to the voltage. Machines cant adjust the pressure by itself, so it may cause the crinkle or glue lacking of books. This technology can set the clamp pressure automatically according to the different voltage. |
| 18 |
sun-shape cutter |
Sun-shape cutter can make the spine the book more rough, so the papers will not be easily loosen. And the folded book block can be bound without cutting. |
Perfect Binding Machines